DIY the Best Putting Greens: How to Prepare the Ground Before Installation

Landscape-Design

Whether you’re a dedicated golfer or a casual player, you’ll love having a residential putting green. It’ll allow you to practice your skills anytime you want minus club membership fees, equipment rental costs, and other expenses. Save money by taking the DIY route with your installation! Keep in mind that building the best putting greens requires proper ground preparation. The following tips should help you ace this step!

How to Prepare the Ground for Synthetic Turf Installation

A top-quality putting green starts with excellent foundations. Make sure your putting green offers pro-level gameplay with this ground preparation guide:

  1. Mark your installation site.

Marking your installation site will help you narrow down the areas you need to prepare for the installation. Use ground markers or stake rods into the soil and connect them using brightly colored cords.

  1. Locate underground hazards.

Locating existing hazards underground is crucial, primarily if your installation site is above critical irrigation lines. Take off unwanted sprinkler heads. Afterward, make sure all the remaining plumbings are working properly before continuing your preparations for the best putting greens. Do the same for any electrical fixture within your project area.

  1. Remove all vegetation.

Take off weeds, plants, and other organics by hand or using gardening tools. The natural turf should be removed to a depth of 50mm if you’re going for standard base construction. If you’re doing this by hand, be prepared for a few arduous hours of tilling your soil. Use a shovel, pickaxe, and sod cutter to speed up the process.

  1. Examine the soil conditions.

Take note of the soil’s ability to drain water to determine the right type of aggregate for your installation. You may need to invest in sand or stone, depending on your findings. Keep the following in mind;

• If the soil conditions inhibit drainage, an extra stone layer subbase is a must.

• If the soil conditions enable free drainage, a standard base construction made of sand is enough.

Need help identifying the correct aggregate for your site? Talk to the best artificial turf supplier ASAP.

  1. Prepare the installation base.

The base will dictate the integrity and stability of your synthetic putting green, so be careful with its preparation. Spread a layer of the right aggregate on your installation area. Use a spirit level to ensure even distribution.

  1. Level and compact the installation surface.

Rent a plate compactor or roller compactor for the job. Dampen your installation site and pass over it several times until you reach a compaction rate of 90% or above. Make sure there are no bumps or uneven areas.

  1. Add putting green upgrades.

Ground preparation is the time to install weed barriers, shock-absorbent material, and other course upgrades to your green. Ask your synthetic turf supplier for their recommended accessories.

Achieve the Perfect Putting Green from the Ground Up

After preparing your installation site, head over to your trusted synthetic turf supplier. Explore their offers for putting greens and pick one that offers exceptional durability, ball roll quality, and drainage. Don’t forget to invest in the best artificial grass accessories as well. Share your installation design preferences and ask your supplier for his or her recommendations.

Leave a Reply

Your email address will not be published. Required fields are marked *